• Открыт набор модераторов на нашем форуме. Заявку можно подать в разделе "Вопросы и предложения" > "Набор модераторов".

G27: Park toolhead

  • Просмотры Просмотры: 23
  • Последнее обновление Последнее обновление:
  • Описание
    Park the nozzle at a predefined XYZ position.
    Примечание
    Requires NOZZLE_PARK_FEATURE.
    The park position is defined by NOZZLE_PARK_POINT.
    Использование
    G27 [P<0|1|2>]
    Параметры
    [P<0|1|2>]
    Z axis action
    • P0:
      If current Z-pos is lower than Z-park then the nozzle will be raised to reach Z-park height
    • P1:
      No matter the current Z-pos, the nozzle will be raised/lowered to reach Z-park height
    • P2:
      The nozzle height will be raised by Z-park amount but never going over the machine’s limit of Z_MAX_POS
    Примеры
    The most basic example is to use the command without any arguments, which raises Z by the default distance and moves to the parking position.
    G27 ; Raise Z if lower
    This one is useful as an end script, simply raising Z and parking.
    G27 P2 ; Always raise Z
  • Загрузка…