• Открыт набор модераторов на нашем форуме. Заявку можно подать в разделе "Вопросы и предложения" > "Набор модераторов".

M350: Set micro-stepping

  • Просмотры Просмотры: 17
  • Последнее обновление Последнее обновление:
  • Описание
    If your board has digital micro-stepping pins (X_MS1, Y_MS1, etc.), use this command to set the micro-steps.
    Использование
    M350 [B<1|2|4|8|16>] [E<1|2|4|8|16>] [S<1|2|4|8|16>] [X<1|2|4|8|16>] [Y<1|2|4|8|16>] [Z<1|2|4|8|16>]
    Параметры
    [B<1|2|4|8|16>]
    Set micro-stepping for the 5th stepper driver.
    [E<1|2|4|8|16>]
    Set micro-stepping for the E0 stepper driver.
    [S<1|2|4|8|16>]
    Set micro-stepping for all 5 stepper drivers.
    [X<1|2|4|8|16>]
    Set micro-stepping for the X stepper driver.
    [Y<1|2|4|8|16>]
    Set micro-stepping for the Y stepper driver.
    [Z<1|2|4|8|16>]
    Set micro-stepping for the Z stepper driver.
  • Загрузка…