Описание
This command behaves differently for DUAL_X_CARRIAGE vs. DUAL_NOZZLE_DUPLICATION_MODE
For DUAL_NOZZLE_DUPLICATION_MODE the S2 parameter enables duplication mode. Any other value disables it.
For DUAL_X_CARRIAGE, this command sets the Dual X mode. See the description of S below.
Использование
M605 [R<temp>] S<0|1|2> [X<linear>]
Параметры
[R<temp>]
Temperature difference to apply to E1. (Requires DUAL_X_CARRIAGE)
S<0|1|2>
Select the pin to set for all specified axes.
- S0:
Full control mode. Both carriages are free to move, constrained by safe distance. (Requires DUAL_X_CARRIAGE)
- S1:
Auto-park mode. One carriage parks while the other moves. (Requires DUAL_X_CARRIAGE)
- S2:
Duplication mode. Carriages and extruders move in unison.
[X<linear>]
X distance between dual X carriages. (Requires DUAL_X_CARRIAGE)
